Providing Instrument Solutions Since 1948          Contact Us

 

Specials
HOME
INSTRUMENTS
Hand Held RTD
Hand Held Thermistor
Single/Dual Channel
Multichannel RTD
Multichannel Thermistor
Dry Block Calibrators
SENSORS
All about sensors
RTD
Thermistor
Thermocouple
CALIBRATION/REPAIR
Calibration Services
Our Location
Your location

Used/Refurbished
Trade-ins
Manuals
Scope of Accreditation
Accreditation Certificate
System Uncertainty

Support
About us
 

 

Model 410 Handheld                        Printable Version
RTD Temperature Monitor           Instruments start at $1195.00     

     With Case & Optional Probe With Optional Probe
  • Temperature Range:                     -196°C to 660°C (equivalent °F or K programmable)
     
  • Instrument Uncertainty:                 ±0.020°C at 23° ±5°C ambient (used with 100 ½ sensors)
                                                        ±0.046°F at 23° ±5°C ambient (used with 100 ½ sensors)
                                                        ±0.008 ½ from 0 to 340.000 ½
     
  • Temperature Resolution:                0.01°C (-196° to –100°C),
                                                         0.001°C (-100° to 660°C) and equivalent °F and K ranges.
                                                         (Note: 0.01°C full range resolution is also programmable)
     
  • ITS-90 coefficients may be stored for up to 4 RTD sensors
     
  • Up to 100 data sets may be stored including:
    min/max/average/date/location and last reading with time stamp
     
  • RS232 serial port for data upload or download of coefficients and
    commands
     
  • 7-hour nickel-metal-hydride battery (AC adapter/charger included)
     
  • Multifunction stand for tilt, lanyard, and wall mounting.

    The Instrulab 410 handheld model with its stable, large, backlit LCD display with contrast adjustment facilitates
accurate field temperature measurement in almost any environment.
The display is timed to prevent unnecessary battery drain. Its ability to store calculated data sets along
with other necessary parameters means no copying, interpolation or logging errors. Its multifunction
stand allows for placement on the bench, hanging on the wall or from a lanyard strap.
    Password protection prevents accidental or malicious tampering with data or calibration coefficients.
The optional carrying case provides convenient portability while protecting the instrument and
sensor. Another added bonus: there's a place to store your manual, so it won't get lost.
    A wide range of RTD sensors are available from Instrulab to meet your application needs. And don't forget application assistance is always just a phone call away.

Let Instrulab be your Temperature Specialist

  SPECIFICATIONS  
  Temperature Range


  Instrument Uncertainty

  Resolution


 
  Resistance


  Typical System Accuracy

  Sensor Type

  Sensor Coefficients

  Sensor Inputs

  Sensor Excitation

  Operating Ambient

  Warm-up Time

  Temperature Coefficient

  Display

 

  Power Source
 

  Weight

  -196°C to 660°C, -320°F to 1220°F using ITS 90 Coefficients when
  used with 100 Ohm platinum RTD

  ±0.020°C or 0.036°F @ 23° ±5°C ambient

  0.01 or 0.001, °C, °F, K or Ω (Units and resolution programmable )
  except 0.01 fixed from -196° to -100° and above 999.999


  0 to 340,000 with an uncertainty of ±0.008 Ω


  0.03° to 0.1°C with Series 830 or 840 Sensors

  100Ω platinum RTD with alpha between 0.00385 and 0.003926

  Rtp and ITS-90 coefficients for sensors' calibrated range

  Up to 4 sets of 100 ohm sensor coefficients may be stored

  1 mA nominal

  5° to 45°C up to 80% humidity (non-condensing)

  Within specified accuracy upon turn on, optimum after 15 minutes

  ± 2ppm per degree C from 23°C

  Backlit LCD, approx. 3/8" high for measurements
      plus smaller characters for alphanumeric information
  Backlight may be timed to prevent unnecessary battery drain.

  115 VAC or internal NiMH batteries (up to 7 hrs.). charger included
  (contact factor for other power sources)

  0.45 kg
 

 Contact us